Agricultural Engineering MCQ Quiz Hub

Agricultural Engineering MCQs Set-6

Choose a topic to test your knowledge and improve your Agricultural Engineering skills

1. Solidification of HW is done at TSDF to reduce ________




2. According to CPCB the major criteria considered for selection of technologies are _________




3. As per CPCB the waste processing technologies are divided into _________ categories.




4. The biological activities depend upon __________




5. Vermi-composting can treat oily and spicy waste.




6. The major issues contributing to difficulties in siting hazardous waste facility are _________




7. Hazardous waste management requires __________




8. Hazardous facility siting is a __________




9. Current hazardous waste facility strategies tend to be facility-specific.




10. EPA ID is required for very small quantity generators.




11. On-Site Accumulation Quantity of small scale generators is less than ______ kg.




12. Accumulation time limit for SQG is less than or equal to _______ days.




13. ______ planning is required for Emergency Procedures while handling SQG waste.




14. A generator must keep a copy of each manifest signed for a period of _____ years.




15. A transporter must keep a copy of each Biennial Report for three years.




16. The generator must sign the manifest by ________




17. For shipments of hazardous waste within the United States only by water _______ copies of manifest must be sent.




18. For rejected shipments of hazardous waste the generator must _________




19. Generator is not held responsible for non-submission of ________




20. A generator who initiates a shipment of hazardous waste must certify _________ techniques adopted.




21. Managing waste is the responsibility of the government.




22. The ______ Government is responsible for national legislation in Sydney.




23. The first complete domestic approach to waste management was agreed by _____ council.




24. ______ policy offers national framework for waste management and resource recovery in Australia.




25. ______ are designed to assist environmental management.




26. Which of the act is addressed for energy production?




27. Which act is responsible for reducing pollution at source?




28. The National pollution prevention policy states waste should be released to environment as quick as possible.




29. ______ programme is undertaken by UK government to deliver resource efficiency policies.




30. The process used to destroy toxicity of waste by changing oxidation state is __________




31. Which of the following solutions can be treated by reduction or oxidation process?




32. Chlorine is a reducing agent.




33. Electroplating wastes can be treated from ________ process.




34. Which among the following is cheapest oxidizing reagent?




35. Oxidation avoids harmful side reactions.




36. Which among the following is the commonest waste treated by reduction?




37. _________ method is more suitable in removing organic species in waste solution.




38. The most common applications of chemical reduction is reduction of ________




39. Suitable method for treating acidic or basic hazardous waste is _________




40. Neutralisation involves addition of _________ substances with the waste.




41. Common reagents for neutralising acid wastes are __________




42. Common reagents for neutralising alkaline wastes are ________




43. Dissolved salts of hazardous metal wastes can be treated by neutralisation.




44. Neutralisation process is extensively applied for ________ hazardous waste.




45. Neutralisation adjusts pH level of corrosive between ____ and ____




46. Personal protective equipment should be worn while neutralising corrosive hazardous waste.




47. The process of neutralizing waste as listed in WAC 173-303-090 is known as ____________




48. Rate of evaporation of liquid waste is measured by _______




49. Liquids with high vapour pressure evaporates slowly.




50. __________ separation techniques are used before evaporation process.